DNS Server Not Responding Error Fixed For Windows 7, 8, 8.1, 10: Are you facing ”DNS Server Not Responding” error when trying to visit or while loading any web page or when connecting to the network? So, first of all, I would like to explain what DNS is? So, Domain Name Server (DNS) is an Internet service that translates domain names into IP Addresses, and the Internet is based on IP addresses. However, there are various elements responsible for the loss of connection to the server like corrupt setting, problems on the server, etc. Whereas, the problem which many computer users face daily worldwide is that when they try to connect to the Internet then connection might fail due to corrupt barrier settings while when they run the troubleshooter then the error occur is ”The Device or Resource (DNS Server) is not Responding”. So, the exact error is “Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding.”
- 1 DNS: Internet Naming
- 2 How To Fix DNS Server Is Not Responding Error
DNS: Internet Naming
The domain name system (DNS) is the system responsible for converting alphanumeric domain names into numeric IP addresses. The naming is decentralized globally distributed DNS servers. Thus, each Internet address written in the search bar of the web browser is sent from the router to a DNS server. This translates the domain name into a sequence of numbers and sends back the IP address corresponding. If the response from the DNS server fails, you can not access the website and the error message “The DNS server is not responding” appear.
Reasons Behind DNS Server Not Responding Error
- Due to corrupted DNS Service.
- Due to security firewall certainly blocked your PC and working as a barrier, didn’t communicate with websites.
How To Fix DNS Server Is Not Responding Error
The cause of this annoying error message may be a network failure. This means that the DNS server is temporarily unavailable. In most cases, the cause of the problem is related to browser settings or configuration changes to the firewall.
Try other browsers
To check if the “DNS is not responding” problem is produced by the web browser, will have to open the desired web page using alternative applications. Among the most common options are Mozilla Firefox, Google Chrome, Microsoft Internet Explorer and Apple Safari. If the error disappears after trying a different browser, you may have to adjust the settings of your current browser, and verify that you are using the latest version of it. It may also be helpful to remove the program and reinstall it again.
If the change does not yield any results with the new browser, one of the most common causes of this “DNS server is not responding” error is the Windows firewall. Go to the Control Panel and turn off Firewall temporarily. Once this is done, the error message disappears and you can access the desired web, it is possible that the cause of the problem was indeed the firewall. Therefore, the next step will be managing your configuration. If even after disabling Firewall the error remains, you will have to concentrate on direct DNS server configuration.
Restarting the Router
Normally, Internet connection problems can be solved by restarting the router. You only need to press the corresponding button. A slightly ruder option is to unplug the power cord. In this case, you must wait about 30 seconds until all the electronic components are completely off before connecting again. If, despite restarting the router, the message “The DNS server does not respond” appears, it will be necessary to choose a different DNS server.
If you have ruled out common sources of error as a fall router or a conflict with the Windows Firewall, the next step will be to change the DNS server. Usually, the name resolution for private users is managed by the name server of the ISP, whose servers can be slow or be overloaded. With just a few clicks you can replace your DNS server on your own. One of the alternatives is public DNS servers normally found in the special lists of DNS servers. One of the DNS servers is fast, free and trustworthy public servant is operated by Google.
Change DNS from the router
Step One: Access the router
If you want to change your DNS settings from your router, open your browser and follow the steps that follow to access this:
- Open the Windows command line (shortcut Windows key + R), type cmd in the opening line and confirms entry
- Then type ipconfig in the window and copy the number listed as “Standardgateway” to the clipboard
- Enter the number in the address bar of your web browser, please confirm and connect with your login details
Step Two: Configure another DNS
- Select the “Internet” option from the menu and click on “Account Information.”
- Then click “DNS Server.”
- Check the box that says “Use other DNSv4 servers.”
- If, for example, you want to use Google’s DNS server, in the “Preferred DNSv4 server” field enter the address 188.8.131.52 and 184.108.40.206 on “Alternative DNSv4 server”.
The specification made in the latter field is used as a backup in case of failure preferred DNS server.
Note: If instead of the Internet Protocol 4 (IPv4) you prefer to use protocol version six (IPv6), you must replace server addresses. IPv6 addresses Google Public DNS are:
- 2001: 4860: 4860 :: 8888
- 2001: 4860: 4860 :: 8844
Change DNS from Windows
Step One: Show Network Connections
To configure the DNS on Windows 7, Windows 8 or Windows 10, you must access the network connection settings. Click the Windows key and enter “Network Connections” in the search box, then select the item “View network connections.” Alternatively, you can enter ncpa.cpl command and confirm with the Enter key.
If you use Windows 10 operating system, you only have to click the right mouse button on the Windows symbol and select the “Network Connections” option.
Step Two: Change Adapter Settings
In this part, you need to select the Internet adapter used. If you use WLAN to connect to the Internet, you need to select the wireless adapter or Wi-Fi. If you connect with a LAN adapter, then select the option for a network cable. Once you have selected the type of network you belong, click the right mouse button and select “Properties”.
Step Three: Select Internet Protocol
Now you must choose the corresponding Internet protocol. Among the options are the fourth and sixth version of the protocol. In most cases, the “Internet Protocol Version 4” is used. Select it and click the “Properties” button.
Step Four: Change the DNS server address
Now it will be possible to change the DNS server address in Windows. The options “Obtain an IP address automatically” and “Obtain DNS server address automatically” will always be marked by default. If not, it is recommended that the DNS server registered notes to undo the changes if you make a mistake during configuration.
To enter the DNS server address manually, click “Use the following DNS server addresses” and enter the address you want. If, for example, you want to use Google’s DNS server, copy the address 220.127.116.11 in the field “Preferred DNS server” and address in the box The specification made in the latter field is used as a backup in case of failure preferred DNS server. “Alternate DNS server.” In theory, it is not necessary to fill the second field, then this entry is only valid when problems with the preferred DNS server. It is important that all the settings from the top, i.e., IP addresses are not changed, even when you have numbers in boxes.
Clicking on the “OK” button will confirm the changes made to the DNS server.
Note: If instead of Internet Protocol version 4 (IPv4) you use the Internet Protocol version 6 (IPv6), you must replace the IP addresses of the DNS server. IPv6 addresses public Google DNS server are:
- 2001: 4860: 4860 :: 8888
- 2001: 4860: 4860 :: 8844
Changing the DNS Server with PowerShell
Another alternative is to change a DNS using standard PowerShell terminal. This method is directed more experienced users. With one command you can configure the DNS without having to make many clicks in Windows menus.
To do this, open PowerShell as an administrator, enter “PowerSheell” in the search box and click the right mouse button to select the “Windows PowerShell” and then “Run as administrator.”
Then you must determine the name (Alias) of the adapter (e.g., network card) through which you are connected to the Internet. To do this, enter the following command in PowerShell:
Get-NetAdapter | select ifDesc, ifAlias, ifIndex, MediaType | fl
In the example, the adapter name used is “Local Area Connection 3”. If the computer is connected to the Internet with a network cable, as in this example, you should enter the following command:
Set-DnsClientServerAddress -InterfaceAlias “Local Area Connection 3” -ServerAddresses “18.104.22.168”, “22.214.171.124”
in the field “Local Area Connection 3” must use the name of the corresponding interface.
If the computer is connected via a wireless connection (Wi-Fi), the following command is entered:
Set-DnsClientServerAddress -InterfaceAlias Wi-Fi -ServerAddresses “126.96.36.199”, “188.8.131.52”
Here also must be replaced “Wi-Fi” by the name of the adapter used. 184.108.40.206 and 220.127.116.11 are public DNS server addresses from Google. If another type of DNS server is used, they must be replaced the corresponding fields.
Change the DNS using the command prompt
Configuring DNS Prompt is a process aimed at users with extensive experience in managing Windows. As with PowerShell, this system does not require the use of any user interface, resulting particularly suitable for maintaining a server.
The first step is to open the command prompt as an administrator. Then, determine the name of the interface (Interface Name) if not known. To do this use the command:
netsh interface show interface
Additionally, you can configure the primary and secondary DNS servers Using commands:
netsh interface ip add dns name = “Local Area Connection 3” addr = 18.104.22.168 index = 1
netsh interface ip add dns name = “Local Area Connection 3” addr = 22.214.171.124 index = 2
Note: the name in quotes must match the exact name of the connected interface. Windows will not issue error messages if the names do not match or are incorrect.
Try the new DNS server
To determine whether it has completely solved the error “The DNS server is not responding” in Windows xp/7/8/8.1/10, you can make a simple test. Enter any URL in your browser, for example, https://www.google.com . If you access immediately to the Google website, the DNS server that you registered is functioning properly.
Otherwise, you can enter the IP address 126.96.36.199. This is one of many IP addresses Google’s website. If after trying both options, you still can not correctly display the web, most likely there is a problem with your DNS server, but with your Internet connection.
At last, we hope you have solved ‘DNS Server Not Responding Issue’ and don’t forget to share it with your friends on social media webs like Facebook and Twitter.